Welcome to the official website of Zhengzhou Shanchuan Heavy Industry Co., LTD.! For details please call:0371-67855088 67855188

CH EN

The dryer

Production situation :

Processing power :Mountains and rivers brand new type dryer is suitable for building materials, industrial factories and mines and concentrator of non-ferrous metals industry of different humidity and granularity of raw material drying.

Range of application :Mainly used for conveying materials and other media, materials are stainless steel, carbon steel and so on. Mainly through the fan will be heated gas into the container, has reached the drying effect, the main application theory for the DC-type hot air dr

Product introduction :Drying machine with belt drying, drum drying, box drying, tower drying and other models; heat source of coal, electricity, gas, etc .; materials in the drying process of hot air flow and radiation type , Hot air drum drying is the hot air from the tail fo

The national sales hotline 24 hours a day :

0371-67855088 67855188

Product advantage


  This company produces the dryer can be tailor-made according to different drying material for heating and heating.Heating can dry charcoal, wine residue, coconut trees leather or other materials.Heat can dry coal, sand, mineral powder, chicken manure, cow dung and so on.The heat source can use coal, gas producer, stove, gas, electric furnace;With reasonable structure, well made, high output, low energy consumption, convenient operation.Product introduction

  Structure composition and the principle of the dryer: this machine consists of the body, transmission parts, parts and material into and out of wind circle.Equipped with Yang plate cylinder is supported by the roll ring in the two pairs of wheels, wheel cylinder to prevent axial movement, motor by the speed reducer drives the big gear and small gear, and the big gear is fixed on the cylinder rotary, wind and prevent cold air into the body and the combustion chamber.Wet material with hot gas to enter the feed end, in a cylinder body of plate material, raise through the hot gas flow and the drying.



Product introduction

Drying machine with belt drying, drum drying, box drying, tower drying and other models; heat source of coal, electricity, gas, etc .; materials in the drying process of hot air flow and radiation type , Hot air drum drying is the hot air from the tail forward movement, and material in full contact with the heat conduction, convection, radiation heat utilization; the heat will be passed directly to the material, so that the material moisture in the cylinder is constantly being evaporated, The mouth of the wind device will be a lot of water, moisture flow out to prevent the dust caused by the secondary pollution; through the internal spiral mixing, cleaning, copy board, to promote the material movement to complete the entire drying process; Avoid reducing repetitive drying procedures.

Technical parameters

type No.

Drum diameter(mm)

The length of the drum(m)

gradient (o )

turn speed(r/min)

heavy The amount (t)

work The rate of (kw)

let product (m3)

Ф0.6x8

Ф600

8

3-5

8

5.1

4

2.26

Ф0.8x10

Ф800

10

3-5

7.2

6.9

4

5.02

Ф1.0x10

Ф1000

10

3-5

6.73

7.5

5.5

7.85

Ф1.2x12

Ф1200

12

3-5

5.8

13.1

11

13.31

Ф1.5x12

Ф1500

12

3-5

4.8

22.3

15

21.2

Ф1.8x14

Ф1800

14

3-5

3.2

45.8

30

48.22

Ф2.2x1.8

Ф2200

18

3-5

3

50.3

37

70.43

Ф2.4x20

Ф2400

20

3-5

2.83

78.4

45

90.43

Ф2.8x24

Ф2800

24

3-5

2.59

97

75

147.8

Ф3.0x20

Ф3000

20

3-5

2.6

102

55

141.3

Ф3.0x25

Ф3000

25

3-5

2.6

110

75

176.7


Online message

  • *Products:
  • *Name:
  • Tel:
  • *E-mail:
  • Add:
  • Remarks:

Zhengzhou Shanchuan Heavy Industry Co., LTD. All Rights Reserved

Contact us  |  Whole Internet Support: Yiweb